Our downloadable content includes case studies, white papers and datasheets in pdf form.

WHITE PAPER: Tackling AMR

AMR is caused by the misuse of antimicrobials, but made worse by antimicrobials contaminating our water. White paper discusses tackling AMR through water treatment.

CASE STUDY: Removal of Pharmaceutical Residues from Wastewater

Removal of pharmaceutical residues (Ciprofloxacin, Diclofenac and Ibuprofen) from wastewater.

CASE STUDY: Removal of Triton X-100 from Pharmaceutical Wastewater

Reduction from 15 mg/L to 0.01 mg/L was reached in less than 6 minutes residence time using about 0.70 Euros worth of energy per m³

CASE STUDY: Nicotine Removal from Nicotine Gum Wastewater

Nyex removed 99% of nicotine from the waste stream to allow our client to discharge their effluent.

CASE STUDY: COD Removal from Tobacco Manufacturing Wastewater

Nyex reduced the overall COD loading from 50mg/L to limit of detection which enabled wastewater reuse.

CASE STUDY: Nicotine Removal from Tobacco Wastewater

Nicotine removal from e-cig and tobacco wastewater using a Nyex-a water treatment system.

CASE STUDY: Phenol Removal from Chemical Wastewater

Phenol removal from chemical wastewater using a Nyex-a water treatment system.

CASE STUDY: Cetylpyridinium Chloride Removal from Personal Care Wastewater

Targeted reduction of Cetylpyridinium Chloride (CPC) using a Nyex-a water treatment system.

CASE STUDY: Colour and COD Removal from Tea Wastewater

Complete removal of colour and reduction of COD in tea wash water using a Nyex-a water treatment system

CASE STUDY: Dye Removal from Textiles Wastewater

How we achieved COD and dye removal from textiles wastewater using a combination of our Nyex-a and Nyex-e water treatment processes.

CASE STUDY: Removal of Herbicides from Industrial Wastewater

How Nyex was used to help an agrochemical producer reduce its wastewater discharge contamination to drinking water standards.

CASE STUDY: RO Reject Water Treatment Uses New Water Technology

Removal of recalcitrant organics from reverse osmosis reject water as part of a petrochemical wastewater treatment process.

WHITE PAPER: How to remove BTEX and phenols from wastewater

How Nyex™ effectively and safely removes BTEX and phenol from specialty chemical wastewater – to below measurable levels.

WHITE PAPER: Ten things you should know about PNEC levels

What are PNEC levels, why are they so important? Our PNEC guide tells you all you need to know to achieve your PNEC levels.

CASE STUDY: Nicotine Removal from Nicotine Gum Wastewater

Nyex removed 99% of nicotine from the waste stream to allow our client to discharge their effluent.

CASE STUDY: Removal of Azoles from Semiconductor Wastewater

A world leading IDM came to us because they had azoles in the water which their existing water treatment processes were unable to remove.

CASE STUDY: Removal of BTEX and PAHs from Chemical Wastewater

This case study describes the removal by Nyex of persistent organic contaminants, BTEX and PAHs.

CASE STUDY: COD Polishing for Sinopec Jinling Petrochemical

With a flow rate of 60 m3/h and an influent concentration of 90 – 150 mg/L COD, the target was to reduce the COD by 15mg/L for safe discharge.

FACT SHEET: Tertiary treatment products Nyex-a and Nyex-e

Arvia offer flexible packages to purchase or rent different models or combination of our technologies based on recommendations from our Process Engineers.

Treatability Trials Datasheet | Arvia Technology

Our expert Process Engineers work to determine the best solution for each tertiary treatment challenge, dependant on individual targets and budget.